Pressure washers are used in the home for a variety of reasons.
Cleaning large surfaces like a driveway, a deck or even the exterior of a home would take days to accomplish with a hand. A portable pressure washer with water tank are a tool that combines the cleaning power of water with high pressure to deliver an effective wash in less time.
Like all tools, to get the most out of a pressure washer, you need to learn how it works. This guide can teach you the fundamentals of working with a pressure washer.
How does a pressure washer work?
How does a pressure washer get its pressure
The pressure washer utilizes the water from a normal outdoor garden hose. The hose is connected to the machine. A high-speed pump inside the unit elevates the water pressure until it can be utilized as a very rough stream. The strength of the spray is controlled through an spray nozzle.
What are the different pressure washer nozzles?
The nozzles will ultimately deliver the right type of cleaning power. The nozzles are five common sprayers that are differentiated by how focused on the spray.
The red nozzle makes a thin, powerful jet of water, which is ideal for the toughest staining.
Yellow nozzles are a lower in intensity , and is the best choice for removing paint and mildew.
The green nozzle can be described as a general purpose cleaning nozzle.
The white nozzle comes with the biggest spray, which makes it ideal for cleaning and rinsing.
This nozzle in black is only the one which is able to be used with soap. In addition, you can buy a turbo spray nozzle as well as a multi-purpose nozzle or an surface cleaning attachment which is great for cleaning patios, decks and more.
While the best directions for the use of the pressure washer are included with the purchase, this outline can give you an understanding of the entire process.
- Clear the area you’ll soon be cleaning to make sure all fragile items have been removed. Sweep away dirt and debris and cover everything that isn’t movable with an tarp.
- Survey the area so you’re aware of any outlets, windows and vents.
- Select and connect the right nozzle to the task.
- Attach your garden hose and pressure washer, and give the equipment a once-over to ensure that everything is secured securely and that the machine is safe to use.
- Put on a pair of safety glasses to keep debris from splashing back into your eyes.
- Turn on the water supply from the outside spigot.
- Press at the trigger of the wand to release all air tension that could be present in the line.
- Follow the instructions for your specific machine to start your machine.
- Before use, test the intensity of the spray in a safe location and adjust as required.
- You can now begin cleaning.
- After shutting off your pressure washer and shutting off your water source, ensure you press the trigger hard enough so that any pressure water to escape before disconnecting the hose and any other parts.
Pressure washing tips
- Pressure washers use a lot of water. Make sure you have sufficient drainage around the area where you’re working or things will quickly get messy.
- The most important thing to remember when cleaning safely is using the right nozzle for the job. Make sure you choose wisely, since an improper nozzle can cause damage to siding and wood.
- Beware of spraying on painted surfaces, windows or outdoor fixtures. Also, avoid spraying electrical lines.
- If you’re closer to the surface, the more thoroughly the pressure washer will cleanse. Always begin cleaning from an area that is a few feet away. If you’re looking for greater power then gradually bring your sprayer towards the area you’re cleaning.
- Do not use a pressure washer when you’re on the ladder.
- When cleaning vertically, you should move across the top of your work in a side-toside pattern.
- Work in small areas with clearly set goals.
- If you’re exhausted, take a break.